Manifolds
REHAU Manifold 
REHAU supply two types of manifolds:
Standard manifolds.
Flow meter manifolds.
Both manifolds are available for 2 - 12 underfloor heating circuits and are supplied fully assembled with galvanised fixing brackets. Each manifold with 1" flow / return headers are produced as a single unit from high quality brass (Ms63/CW508L). The connections on the flow header (identified by the red label "supply") should be off set to the connections on the return header, this allows for easy installation.
Standard Manifold
The flow valves for the thermal actuators are on the return header (identified by the blue label "return").
The combination flow and balancing valves are located on the flow header (identified by the red label "supply").
To adjust the balancing valve, please use the key provided.
The manifolds are fully compliant to BS 1264 - 4.
Flow Meter Manifold
The flow meters are on the flow header (identified by the red label "supply").
The thermal actuators fit onto the combination flow and balancing valves, which are located on the return header (identified by the blue label "return").
To adjust the balancing valve, please use the key provided.
They feature quick stop isolating valves for each circuit as required by BS 1264 - 4.
Both manifolds are available for 2 - 12 underfloor heating circuits and are supplied fully assembled with galvanised fixing brackets. Each manifold with 1" flow / return headers are produced as a single unit from high quality brass (Ms63/CW508L). The connections on the flow header (identified by the red label "supply") should be off set to the connections on the return header, this allows for easy installation.
Standard Manifold
Flow Meter Manifold
 | Section 3_Manifolds | 1194 kb |
www.rehau.co.uk: Building Solutions > Underfloor Heating > Manifolds
© REHAU Ltd. All Rights reserved. 2008
© REHAU Ltd. All Rights reserved. 2008