RAUPIANO PLUS
THE SOUND INSULATED WASTE WATER SYSTEM
Where silence matters - the domestic waste water system for all applications, in private homes, hotels, schools, hospiitals, office blocks or commercial kitchens.
Raupiano Plus - Rigid and sound-absorbing middle layer
- Abrasion-resistant and smooth inner layer made of PP
- Impact resistant and shock-proof layer made of PP
- UV Resistant Outer layer
- Chemical resistance from pH2-12
- Hot water supply up to 95°C
- Integrated sockets with sealing rings
- Easy push-fit technique
- Minimal training required
- Compliant with UK underground European standards
- Fire Collars tested to BS 476 Part 20
- Reduced noise levels emanating from the pipe system
- Ability to remain free of deposits
- Robust for transport, handling and storage.
- Excellent cold impact strength
- Enables outdoor storage
- Extended product life-time
- Covers system malfunction
- Reduced installation time and costs
- Minimal skills required
- Off the shelf product
- No additional adaptors required
- Collars prevent toxic fumes to circulate
What is the application of RAUPIANO PLUS?
RAUPIANO PLUS is designed for heavy-duty drainage systems in accordance with DIN EN 12056 and DIN 1986 – 100 inside buildings and has been approved by the Deutsches Institut für Bautechnik (DIBt) (ABZ-42.1-223).
The pipes, fittings and sealing elements can be used at up to 95° (short-term). They are suitable for draining chemically aggressive waste water with a pH value of between 2 (acidic) and 12 (alkaline). The fire behaviour corresponds to B2 normally inflammable in accordance with DIN 4102. The pipe connections are watertight up to a water pressure of 0.5 bar (5 m water column).
For use in areas where, during installation, temperatures of below - 10°C are commonplace, additional testing is required in accordance with BS EN 1451. RAUPIANO PLUS has passed this test and can therefore be marked “ice crystal” in accordance with BS EN 1451 and 1411 and can also be installed in such regions.
For what applications can RAUPIANO PLUS NOT be used?
Pipes and fittings must not be used for:
- Lines subject to a permanent load of more than 90°C (short-term 95°)
- Lines that carry waste water containing benzene or benzol
- Underground lines
- Exposed outside lines
What pipe dimensions are available?
RAUPIANO PLUS is available in nominal diameters of DN 40 to DN 160. An extensive range of fittings and fastenings rounds off the system.
What makes this system special?
- A high quality product and an attractive look
- Outstanding sound-insulating properties
- Optimum sliding properties of the abrasion-resistant inner layer
- Excellent low-temperature impact strength, breakage resistance up to - 10°C
- High ring stiffness – robust during transportation and on the construction site
- Outdoor storage possible for up to 2 years
Why has RAUPIANO got a three-layer wall structure?
The multi-layer structure leads to increased pipe rigidity. In addition, the abrasion-resistant and low-friction inner layer and the impact-resistant outer layer provide optimum properties as a modern domestic drainage system.
How Contribute The RAUPIANO PLUS Pipe Fittings to Reduce Noise?
Where there are changes in direction, there is a danger that the pipe system will begin to vibrate locally in critical drainage situations. This may have a negative effect on the noise-related properties.
In order to minimise this effect, a targeted mass optimisation has been carried out in bends of the nominal diameters DN 90, DN 110 and DN 125. This stabilises the noise-related behaviour, reduces noise development and thus achieves greater sound insulation in the area of impact.
How Can RAUPIANO PLUS Cope With The Matter Of Fire Protection?
In order to fulfil all necessary fire safety properties, the system includes an extensive and in accordance to BS 476 system-tested range of fireproofing collars. For more information please contact your local Sales Office.
www.rehau.co.uk: Building Solutions > Heating & Plumbing > RAUPIANO PLUS
© REHAU Ltd. All Rights reserved. 2010