With this REHAU system energy is extracted from the ground through a closed circuit. The water circulating in the RAUGEO probe serves as heat carrier medium. The RAUGEO PE-Xa probe is installed without connections in the ground. With the help of a heat pump the extracted heat is raised to the temperature needed for heating.
RAUGEO PE-Xa ground heat probe
At least 75% of the energy comes from the ground
No need for joints in the soil ensures highest operational reliability
PE-Xa material is not sensitive to notches and grooves
Optimal safety during insertion into the borehole
Simple insertion even into the tightest boreholes
Heat storage up to 95°C is possible
Cost-effective heating from ground source energy
RAUGEO PE-Xa probe is extremely reliable in service, small bending radius elliminates the need for joints or other connections at the probe base
Stable up to temperatures of 95°C, thus the RAUGEO PE-Xa probe can be used for heat storage purposes
RAUGEO PE-Xa probe base is protected by a special tough resin
The RAUGEO PE-Xa probe can be connected by means of electrofusion sleeve or by mean of REHAU – compression sleeve under all climatic conditions
Applicable up to a depth of 300 m
For ground source heating/cooling using heat pump
Optimal in combination with underfloor heating and cooling in the house