REHAU Ltd. - RAUGEO probe

Login Customer Portal

Latest News

Read more about our latest successes...More

Contact

For more information about products and services from REHAU Civil EngineeringComplete an information request
Contact telephone numbers

RAUGEO probes

Installed in boreholes up to 100m deep

With this REHAU system energy is extracted from the ground through a closed circuit. The water circulating in the RAUGEO probe serves as heat carrier medium. The RAUGEO PE-Xa probe is installed without connections in the ground. With the help of a heat pump the extracted heat is raised to the temperature needed for heating.

RAUGEO PE-Xa ground heat probe

At least 75% of the energy comes from the ground
No need for joints in the soil ensures highest operational reliability
PE-Xa material is not sensitive to notches and grooves
Optimal safety during insertion into the borehole
Simple insertion even into the tightest boreholes
Heat storage up to 95°C is possible
Cost-effective heating from ground source energy

RAUGEO PE-Xa probe is extremely reliable in service, small bending radius elliminates the need for joints or other connections at the probe base
Stable up to temperatures of 95°C, thus the RAUGEO PE-Xa probe can be used for heat storage purposes
RAUGEO PE-Xa probe base is protected by a special tough resin
The RAUGEO PE-Xa probe can be connected by means of electrofusion sleeve or by mean of REHAU – compression sleeve under all climatic conditions

Applicable up to a depth of 300 m
For ground source heating/cooling using heat pump
Optimal in combination with underfloor heating and cooling in the house
Open areas
Heat storage is possible

Spacer
Y-pipe
Manifold
Glycol
Wall sealing flange
Weight

	RAUGEO Ground-source Sales Brochure	1885 kb
	RAUGEO Ground-source Probes Flyer	3659 kb
	Bad Lauterberg	191 kb
	LVM Offices Case Study	228 kb
	Ground-source specification phrases	74 kb

Print this page