RAUVIA large diameter lightweight pipe
The specialist for rainwater sewers, filter pipes and special applications.
RAUVIA complies with DIN 16961 and future European standard EN 13476.These standards do not only place exacting demands on the pipe itself, they also relate to the entire pipe system. This way, RAUVIA provides the reliability that is required when using the pipe in rainwater and waste water sewers.
This structured wall sewer system is used wherever a high level of variability is demanded of the pipe system.
- Quick and easy to lay
- High level of technical safety: Capacity for deformation without rupture at least 30 % to EN 1446
- DIBT- approved (SN4)
- Great discharge capacity and abrasion resistance; can be subjected to high pressure wash without any problems
- The smooth white surface inside ensures best hydraulic results and ideal camera inspections
- The wide product range allows a variety of applications
- Easy transport and storing
- Loading capacity up to 60 even with poor covering due to ring stiffness SN8
- High-load sewage piping system made of PE-HD with fluted black outer skin and smooth white surface inside.
- Designed to DN 16961 and prEN 13476
- Ring stiffness SN4 and SN8 to ISO 9969 for use with high static and dynamic loads
- Dimensions DN OD 125-1200 and DN ID 300-1000
- Wide range of mouldings and shafts
- Less joints because of 6m or 12m laying length
- A welded on socket can be delivered from DN OD 800 and ID 600
- Permanently pressure-sealed up to 0.5 bar to EN 1277
- 100% recyclable
- Applications: waste water system, distribution pipe, storage pipe, discharge system, percolation pipe, storm water drainage
- non-slotted pipes DN OD 125 – 1200, SN4 and SN8
- non-slotted pipes DN ID 300 – 1000, SN4 and SN8
- percolation pipes DN OD 160-1200, SN 4 and SN 8, as full percolation pipe ( slot angle 360°), part percolation pipe (slot angle between 200-220°) or multi-purpose pipe (slot angle between 85-120°)
- percolation pipes DN ID 300-1000, SN 4 or SN 8, as full percolation pipe ( slot angle 360°), part percolation pipe (slot angle between 180-215°) or multi-purpose pipe (slot angle between 85-95°)
- Mouldings DN OD and ID (double push-fit socket, sealing ring, oil-resistant NBR sealing ring, socket, reducer, cap, bends, 45° and 90° branches to RAUVIA Special, 45° and 90° branches to KG, shaft lining sleeve, connection reducers to KG, special mouldings)
- Modular shaft range with rotated bases DN 630, 800, 10000, 1200 with various inlets and outlets.
- Tailor-made shafts with bottom parts from DN 800, with silt trap or drainage channel as well as connections in various dimensions and heights depending on the requirements
www.rehau.co.uk: Building Solutions > Civil Engineering & Renewable Energy Systems > Sewage Pipes > RAUVIA large diameter lightweight pipe
© REHAU Ltd. All Rights reserved. 2008
© REHAU Ltd. All Rights reserved. 2008